ANNUAL REPORT 2013
FARO’s technology increases productivity by dramatically reducing the amount of on-site measuring time, and the various industry-specific software packages enable users to process and present their results quickly and more effectively.
With over 30,000 installations and 15,000 customers globally, FARO is the world’s most trusted source for 3D measurement technology. The Company develops and markets computer-aided measurement and imaging devices and software. Technology from FARO permits high-precision 3D measurement, imaging and comparison of parts and complex structures within production and quality assurance processes. The devices are used for inspecting components and assemblies, rapid prototyping, documenting large volume spaces or structures in 3D, surveying and construction, as well as for investigation and reconstruction of accident sites or crime scenes.
FARO’s technology increases productivity by dramatically reducing the amount of on-site measuring time, and the various industry-specific software packages enable users to process and present their results quickly and more effectively. FARO equipment is used by companies around the world in production and quality control. Airbus, Audi, Boeing, BMW, Ford, General Electric, General Motors, Honda, Johnson Controls, Komatsu American International, Lockheed Martin, NASA, Northrup Grumman, Siemens and Volkswagen belong to FARO’s extensive customer list.
Principal products include the world’s best-selling portable measurement arm – the FaroArm®; the world‘s best-selling laser tracker – the FARO Laser Tracker VantageTM; the FARO Laser ScanArm®; the FARO FOCUS3D; the FARO Gage articulated measuring device; the FARO 3D Imager AMP; and the CAM2® family of advanced CAD-based measurement and reporting software. FARO is ISO-9001 certified and ISO-17025 laboratory registered.
FARO about
RESULTS operating
2011 2012 2013 Sales $ 254.2 $ 273.4 $ 291.8 Gross Profit $ 143.7 $ 149.6 $ 161.9 Gross Margin 56.5% 54.7% 55.5% Operating Income $ 32.9 $ 31.6 $ 30.2 Operating Margin 12.9% 11.5% 10.3% Diluted Earnings per Share $ 1.39 $ 1.34 $ 1.25 Current Ratio 4.7 5.2 5.3 Financial Highlights for 2013
Comparison 2011- 2013
(In millions of dollars, except percentages, EPS & Current Ratio)
Sales
(in millions)
$291.8
$273.4
$254.2
2011 2012 2013
Gross Profit
(in millions)
Diluted EPS
(in dollars)
$161.9
$149.6
$143.7
$1.25
$1.34
$1.39
2011 2012 2013
2011 2012 2013
The Company performed well in 2013 with sales and gross profit growth of 7% and 8% respectively. Our cash position grew 20% to $190 million. In 2013 we decided to expand our R&D activities, increasing our investment by 27%, which resulted in FARO delivering several exciting new products in 2013 and accelerated the pace of product releases for 2014. We also expanded our sales organization to build on the positive momentum for the demand in our products. Since the downturn in 2009, sales and gross profit have each grown at a compound annual growth rate of 19%, and our cash position has grown at a compound annual growth rate of 17%. While there has been variation within each individual year, in aggregate the Company has performed extremely well.
We enhanced the Company’s product portfolio significantly in 2013 with the introduction of four exciting new products. Our latest generation Laser Line Probe made significant advancements in working with dark and reflective materials, critical to our customers in industries like aerospace and automotive, and building on our competitive advantages in terms of size, weight, ease of use and price. Our latest generation CAM2 Measure software was the first FARO version to include point cloud functionality for metrology, and our FARO Web Share software is the first to enable full point cloud sharing over the web, including all 3D data, a big step forward from simple
visualization over the Web. Finally, the new X330 Laser Scanner disrupted the market again by tripling the range of the device and added GPS capability which provides increased product differentiation and greater functionality for use in new applications. FARO’s product development strategy is fundamental to maintaining our position as the world’s most trusted source for 3D measurement, imaging and realization technology. Our new product pipeline remains robust with exciting new products planned for 2014.
The Company is positioned well for the growth: we have excellent products, a very capable team, and an extremely strong market position. As we look ahead, the Company will be driving three fundamental strategies to achieve our long- term objectives.
Penetrate the Core
FARO’s customer base is geographically diverse and spread across a wide range of industries. There are six key vertical markets that offer FARO the most market potential: aerospace, automotive, heavy industrial and energy in our metrology business; and Architecture, Engineering and Construction (AEC) and Law Enforcement in our 3D Documentation business. In 2014 we plan to deepen our knowledge of and penetration into these verticals. In turn, that will drive additional R&D and spark new M&A opportunities to
shareholders letter to
From the desk of Jay Freeland
pursue. We intend to further leverage our deep relationships with key customers in these verticals, which will assist us in our product development planning and will provide efficient and useful test platforms.
Expand the Field
As we “Penetrate the Core,” we will also be working to “Expand the Field.” This means looking across all current and developing technologies, regardless of industry, to identify meaningful opportunities for FARO. Eight years ago, we entered the 3D Documentation space with the acquisition of a small laser scanner company in Germany. At the time, that technology was not linked specifically to any of our key vertical markets. However, it was a logical extension of the FARO product portfolio from a pure technology standpoint. That small, but strategic investment now represents our second largest product in terms of revenue and has opened up new vertical markets such as AEC and Law Enforcement, which together could potentially represent over $1.0 billion of annual opportunity for FARO. Without the Laser Scanner technology, these vertical markets would not be accessible to us today. While having a deep understanding of the verticals we currently sell into is critically important, being able to see across a broad set of technologies is equally important and fundamental to our business strategy.
Disrupt the Marketplace
FARO has been a disruptive force in the marketplace for more than 30 years. We have been disruptive in technology, products and our approach to the market. Disruption is part of FARO’s cultural core and a mindset we
different in this regard. We plan to aggressively pursue acquisitions to enhance our optical technologies and software capabilities. Our R&D teams are focused on solving our customers’ most pressing and critical problems while also envisioning their future requirements. In 2014, for the first time, we are establishing a stand-alone research organization, independent from the existing product teams, to focus on solving customers’ 3D measurement, imaging and realization issues using a unique technological approach. We will also continue adding new account managers to our sales organization while simultaneously establishing additional channels to appropriately target customers that can be accessed more effectively. Purposeful change and thoughtful experimentation are critical to the vitality of any successful organization and at FARO we have fully engrained those concepts into our culture.
Looking forward, we have all the right pieces in place to drive FARO’s next wave of growth: world-class technology; a passionate, dedicated team; and clear market leadership. Combined with our extraordinary financial resources, we have the flexibility and the capability to move quickly and aggressively. We are more excited than ever about FARO’s prospects going forward and remain confident the best is yet to come.
Sincerely,
FARO has been a disruptive force in
the marketplace for more than 30 years. We have been disruptive in technology, products and our approach to the market.
Jay W. Freeland President & CEO
CAD Model
“Computer-Aided Design” that is created with software on a computer that defines the exact shape and dimensions of a part.
CAD-to-Part Inspections
Measuring a part and comparing the actual part to an
“ideal” CAD Model using a device like a FaroArm or FARO Laser Tracker.
CAM2®
An acronym for computer-aided measurement, the large underserved market in which the company operates.
CAM2® Measure
“Draw as you measure” inspection software used with FaroArms and FARO Laser Trackers to compare the measured part to its original design, CAD model and/or to log the data for statistical process control.
FaroArm®
A portable six or seven-axis electronic/mechanical device used for inspecting parts between 2 inches and 12 feet in size, usually by touching the part with a hard probe attached to the end of the device. Usually complemented by “draw as you measure” software that can compare parts back to CAD models.
FARO® Gage
A portable six-axis electronic/mechanical device used for inspecting parts up to 2 feet in size, usually by touching the part with a hard probe. The FARO Gage has a simple user interface, specifically aimed at immediate out-of- the-box measurement suitable for small machine shops as well as large factories.
FARO® Laser Scanner
A portable, high-density data collection device used for capturing the “as-built” condition of structures, such as factories or bridges, to allow the user to more efficiently design changes to or replacements for the measured structures. This device can also be used to capture accident, crime or insurance claim scenes and cultural
FARO® Laser Tracker
A portable three-axis laser-based device used for inspecting large parts or assemblies up to 361 feet in size. Set on a tripod, it operates by tracking a bounced laser beam off a movable, reflective target that is placed on the point being measured. Usually complemented by
“draw as you measure” software that can compare parts back to CAD models.
FARO Laser ScanArm®
A portable six or seven-axis electronic/mechanical device used for inspecting parts between 2 inches and 12 feet in size, usually by scanning the part with a non- contact Laser Line Probe attached to the end of the device. Usually accompanied by point cloud software that can convert the point data into a CAD model.
Metrology
The study of measurements.
Return on Investment (ROI)
The financial benefits of using a product (i.e., faster time to market, reduced scrap) less the financial cost of the product, divided by the financial cost of the product, multiplied by 100, expressed as a percentage. The time it takes a product to “pay for itself” is reached when ROI becomes a positive number.
Re-Work
The process of trying again when a part or assembly does not fit the first time. In the absence of new data, this is often an expensive trial and error process. FARO’s customers often calculate their return on investment from our products by the reduction price of re-work and scrap.
Statistical Process Control (SPC)
Using data gathering equipment like FARO products to periodically check a process for deviation and using the data to fix the process before it degrades beyond an acceptable limit.
GLOSSARY QUICK GUIDE
T e chnic al T e rms
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
WASHINGTON, D.C. 20549
FORM 10-K
Í ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the fiscal year ended December 31, 2013
or
‘ TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the transition period from to
Commission File Number 0-23081
FARO TECHNOLOGIES, INC.
(Exact name of Registrant as Specified in Its Charter)
Florida 59-3157093
(State or Other Jurisdiction of Incorporation or Organization)
(I.R.S. Employer Identification Number)
250 Technology Park, Lake Mary, FL 32746
(Address of Principal Executive Offices) (Zip Code)
Registrant’s telephone number, including area code: (407) 333-9911 Securities registered pursuant to Section 12(b) of the Act:
Title of each class Name of each exchange on which registered Common Stock, par value $.001 NASDAQ Global Select Market
Securities registered pursuant to Section 12(g) of the Act:None
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes Í No ‘
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ‘ No Í
Indicate by check mark whether the registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes Í No ‘
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes Í No ‘
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§229.405) is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definite proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. ‘
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer or a smaller reporting company. See definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.
Large accelerated filer Í Accelerated filer ‘
Non-accelerated filer ‘ Smaller reporting company ‘
(Do not check if a smaller reporting company)
Indicate by check mark whether the Registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes ‘ No Í The aggregate market value of the Registrant’s common stock held by non-affiliates of the Registrant on June 28, 2013, the last business day of the registrant’s most recently completed second fiscal quarter, was approximately $564 million (based on the last sale on such date on the NASDAQ Global Select Market).
As of February 8, 2014, there were outstanding 17,188,372 shares of the Registrant’s common stock. DOCUMENTS INCORPORATED BY REFERENCE
TABLE OF CONTENTS
Page
PART I . . . 1
Item 1. Business. . . 3
Item 1A. Risk Factors. . . 11
Item 1B. Unresolved Staff Comments. . . 19
Item 2. Properties. . . 19
Item 3. Legal Proceedings. . . 20
Item 4. Mine Safety Disclosures . . . 21
PART II . . . 22
Item 5. Market For Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities. . . 22
Item 6. Selected Financial Data. . . 24
Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations. . . 24
Item 7A. Quantitative and Qualitative Disclosures About Market Risk. . . 35
Item 8. Financial Statements and Supplementary Data. . . 36
Item 9. Changes in and Disagreements with Accountants on Accounting and Financial Disclosure. . . 60
Item 9A. Controls and Procedures. . . 60
Item 9B. Other Information . . . 63
PART III . . . 64
Item 10. Directors, Executive Officers, and Corporate Governance. . . 64
Item 11. Executive Compensation. . . 64
Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters. . . 64
Item 13. Certain Relationships and Related Transactions and Director Independence. . . 64
Item 14. Principal Accounting Fees and Services. . . 64
PART IV . . . 65
Item 15. Exhibits, Financial Statement Schedules. . . 65
PART I
CAUTIONARY STATEMENTS FOR FORWARD-LOOKING INFORMATION
Some of the statements made in this Annual Report on Form 10-K are “forward-looking statements” within the meaning of Section 27A of the Securities Act of 1933, as amended, or the Securities Act, and Section 21E of the Securities Exchange Act of 1934, as amended, or the Exchange Act. Statements that are not historical facts or that describe our plans, beliefs, goals, intentions, objectives, projections, expectations, assumptions, strategies, or future events are forward-looking statements. In addition, words such as “may,” “might,” “would,” “will,” “will be,” “future,” “strategy,” “believe,” “plan,” “should,” “could,” “seek,” “expect,” “anticipate,”
“intend,” “estimate,” “goal,” “objective,” “project,” “forecast,” “target” and similar words identify forward-looking statements.
Forward-looking statements are not guarantees of future performance and are subject to a number of known and unknown risks, uncertainties, and other factors that could cause actual results to differ materially from those expressed or implied by such forward-looking statements. Consequently, undue reliance should not be placed on these forward-looking statements. The Company does not intend to update any forward-looking statements, whether as a result of new information, future events, or otherwise, unless otherwise required by law. Important factors that could cause actual results to differ materially from those contemplated in such forward-looking statements include, among others, the following:
• economic downturn in the manufacturing industry or the domestic and international economies in the regions of the world where the Company operates;
• the Company’s inability to further penetrate its customer base and target markets;
• development by others of new or improved products, processes or technologies that make the Company’s products obsolete or less competitive;
• the Company’s inability to maintain its technological advantage by developing new products and enhancing its existing products;
• the Company’s inability to successfully identify and acquire target companies or achieve expected benefits from acquisitions that are consummated;
• the cyclical nature of the industries of the Company’s customers and material adverse changes in its customers’ access to liquidity and capital;
• the potential for the computer-aided measurement (“CAM2”) market and the potential adoption rate for the Company’s products are difficult to quantify and predict;
• the inability to protect the Company’s patents and other proprietary rights in the United States and foreign countries;
• fluctuations in the Company’s annual and quarterly operating results and the inability to achieve its financial operating targets as a result of a number of factors including, without limitation (i) litigation and regulatory action brought against the Company, (ii) quality issues with its products, (iii) excess or obsolete inventory, (iv) raw material price fluctuations, and other inflationary pressures, (v) expansion of the Company’s manufacturing capability (vi) the size and timing of customer orders, (vii) the amount of time that it takes to fulfill orders and ship the Company’s products, (viii) the length of the Company’s sales cycle to new customers
and the time and expense incurred in further penetrating its existing customer base, (ix) increases in operating expenses required for product development and new product marketing, (x) costs associated with new product introductions, such as product development, marketing, assembly line start-up costs and low introductory period production volumes, (xi) the timing and market acceptance of new products and product enhancements, (xii) customer order deferrals in anticipation of new products and product enhancements, (xiii) the Company’s success in its sales and marketing programs, (xiv) start-up costs associated with opening new sales offices outside of the United States, (xv) fluctuations in revenue without proportionate adjustments in fixed costs, (xvi) efficiencies in managing inventories and fixed assets, (xvii) investments in potential acquisitions or strategic sales, product or other initiatives, (xviii) shrinkage or other inventory losses due to product obsolescence, scrap or material price changes, (xix) adverse changes in the manufacturing industry and general economic conditions, and (xx) compliance with government regulations including health, safety, and environmental matters;
• changes in gross margins due to changing mix of products sold and the different gross margins on different products and sales channels;
• the Company’s inability to successfully maintain the requirements of Restriction of use of Hazardous Substances (“RoHS”) and Waste Electrical and Electronic Equipment (“WEEE”) compliance in its products;
• the inability of the Company’s products to displace traditional measurement devices and attain broad market acceptance;
• the impact of competitive products and pricing in the CAM2 market and the broader market for measurement and inspection devices;
• the effects of increased competition as a result of recent consolidation in the CAM2 market;
• risks associated with expanding international operations, such as fluctuations in currency exchange rates, difficulties in staffing and managing foreign operations, political and economic instability, compliance with import and export regulations, and the burdens and potential exposure of complying with a wide variety of U.S. and foreign laws and labor practices;
• the loss of the Company’s Chief Executive Officer or other key personnel;
• difficulties in recruiting research and development engineers and application engineers;
• the failure to effectively manage the effects of the Company’s growth;
• the impact of reductions or projected reductions in government spending, particularly in the defense sector;
• variations in the effective income tax rate and the difficulty in predicting the tax rate on a quarterly and annual basis;
• the loss of key suppliers and the inability to find sufficient alternative suppliers in a reasonable period or on commercially reasonable terms;
as well as other risks and uncertainties discussed in Part I, Item 1A in this Annual Report on Form 10-K. Moreover, new risks and uncertainties emerge from time to time, and we undertake no obligation to update publicly or review the risks and uncertainties included in this Annual Report on Form 10-K, unless otherwise required by law.
ITEM1. BUSINESS.
The Company designs, develops, manufactures, markets and supports portable, software driven, 3-D measurement and imaging systems used in a broad range of manufacturing, industrial, building construction and forensic applications. The Company’s FaroArm®, FARO Laser ScanArm® and FARO Gage articulated measuring devices, the FARO Laser Tracker Vantage™, the FARO Focus3D, and the FARO 3D Imager AMP, and their companion CAM2® software, provide for Computer-Aided Design, or CAD, based inspection and/or factory-level statistical process control and high-density surveying. These products integrate the measurement, quality inspection, and reverse engineering functions with CAD software to improve productivity, enhance product quality and decrease rework and scrap in the manufacturing process. The Company uses the acronym “CAM2” for this process, which stands for computer-aided measurement. As of December 2013, the Company’s products have been purchased by approximately 15,000 customers worldwide, ranging from small machine shops to such large manufacturing and industrial companies as Audi, Bell Helicopter, Boeing, Bombadier, British Aerospace, Caterpillar, Daimler AG, Ford, General Electric, General Motors, Honda, Johnson Controls, Komatsu America International, Lockheed Martin, NASA, Nissan, Northrup Grumman, Siemens and Volkswagen, among many others, as well as universities and law enforcement agencies.
The Company was founded in 1982 and re-incorporated in Florida in 1992. The Company’s worldwide headquarters are located at 250 Technology Park, Lake Mary, Florida 32746, and its telephone number is (407) 333-9911.
Industry Background
The Company believes four principal forces drive the need for its products and services: 1) the widespread use by manufacturers of CAD in product development, which shortens product cycles; 2) the adoption by manufacturers of quality standards such as Six Sigma and ISO-9001 (and its offshoot QS-9000), which stress the measurement of every step in a manufacturing process to reduce or eliminate defects; 3) the inability of traditional measurement devices to address many manufacturing problems such as throughput, efficiency, and accuracy, especially with respect to large components for products such as automobiles, aircraft, heavy duty construction equipment and factory retrofits, and 4) the growing demand to capture large volumes of three-dimensional data for modeling and analysis.
CAD improves the manufacturing process.The creation of physical products involves the processes of design, engineering, production, and measurement and quality inspection. These basic processes have been profoundly affected by the computer hardware and software revolution that began in the 1980s. CAD software was developed to automate the design process, providing manufacturers with computerized 3-D design capability and shortening the time between design changes. Today, most manufacturers use some form of CAD software to create designs and engineering specifications for new products and to quantify and modify designs and specifications for existing products. While manufacturers previously designed their products to remain in production for longer periods of time, current manufacturing practices must accommodate more frequent product introductions and
modifications, while satisfying more stringent quality and safety standards. Assembly fixtures and measurement tools must be linked to the CAD design to enable production to keep up with the rate of design change.
Quality standards dictate measurement to reduce defects.QS-9000 is the name given to the Quality System Requirements of the automotive industry developed by Chrysler, Ford, General Motors
and major truck manufacturers. Companies registered under QS-9000 are considered to have higher standards and better quality products. Six Sigma is a set of quality standards that embodies the principles of total quality management, focused on measuring results and reducing product or service failure rates to 3.4 per million. All aspects of a Six Sigma company’s infrastructure must be analyzed, and if necessary, restructured to increase revenues and raise customer satisfaction levels. The all- encompassing nature of these and other quality standards has resulted in manufacturers measuring every aspect of their process, including stages of product assembly that may never have been measured before, in part because of the lack of suitable measurement equipment.
Traditional products do not measure up. A significant aspect of the manufacturing process entails measurement and quality inspection. Historically, manufacturers have measured and inspected products using hand-measurement tools such as scales, calipers, micrometers and plumb lines for simple measuring tasks, test (or check) fixtures for certain large manufactured products, and traditional (or fixed) coordinate measurement machines, or CMM, for objects that require higher precision measurement. However, the broader utility of each of these measurement methods is limited.
Although hand-measurement tools are often appropriate for simple geometric measurements, including hole diameters or length and width of a rectangular component, their use for complex part measurements, such as the fender of a car, is limited. Also, these devices do not allow for the measurements to be directly compared electronically to the CAD model of the part. Test fixtures (customized fixed tools used to make comparative measurements of complex production parts to
“master parts”) are relatively expensive and must be reworked or discarded each time a dimensional change is made in the part being measured. In addition, these manual measuring devices do not permit the manufacturer to electronically compare the dimensions of an object with its CAD model.
Conventional CMMs are generally large, fixed-base machines that provide very high levels of precision and provide a link to the CAD model of the object being measured. However, fixed-base CMMs require that the object being measured be brought to the CMM and fit within the CMMs measurement grid. As manufactured subassemblies increase in size and become integrated into even larger assemblies, they become less transportable, thus diminishing the utility of a conventional CMM. Consequently, manufacturers must continue to use hand-measuring tools, or expensive customized test fixtures, to measure large or unconventionally shaped objects. In addition, some parts or assemblies are not easily accessible and cannot be measured using traditional devices.
The market demands three-dimensional data.Various factors contribute to increased market demand for FARO products and services. Conventional surveying equipment is limited to single-point measurements and does not have the capacity to capture and analyze large volumes of three-
dimensional data. As data requirements for construction, civil engineering and forensic inspection projects become more complex, single-point measurement devices will become increasingly more difficult to utilize in those applications.
Escalating global competition has created a demand for higher quality products with shorter life cycles. Customers require more rapid design, greater control of the manufacturing process, tools to compare components to their CAD specifications, the ability to precisely measure components that cannot be measured or inspected by conventional devices, and the ability to capture and analyze large volumes of three-dimensional data. Moreover, they increasingly require measurement capabilities to be integrated into manufacturing processes and to be available on the factory floor. These changing demands have driven the demand for FARO’s products and services.
FARO Products
The FaroArm.The FaroArm is a combination of a portable, six or seven-axis, articulated measurement arm, a computer, and CAM2 software programs, which are described below under
“CAM2 Software”.
❑ Articulated Arm– The articulated arm is comprised of three major joints, each of which may consist of one, two or three axes of motion. The articulated arm is available in a variety of sizes, configurations and precision levels suitable for a broad range of applications. To take a
measurement, the operator simply touches the object to be measured with a probe at the end of the arm and presses a button. Data can be captured at either individual points or a series of points. Optical encoders located at each of the joints of the arm measure the angles at those joints, and this rotational measurement data is transmitted to an on-board controller that converts the arm angles to precise locations in 3-D space using “xyz” position coordinates and “ijk” orientation coordinates.
❑ Computer– The Company pre-installs its CAM2 software on either a notebook or desktop style computer, depending on the customer’s need, and the measurement arm, computer and installed software are sold as a system. The Company purchases the computers sold with its products from various suppliers.
The FARO Laser ScanArm.The FARO Laser ScanArm is a FaroArm equipped with a
combination of a hard probe (like that in the FaroArm) and a non-contact line laser probe. This product provides the Company’s customers the ability to measure products without touching them and offers a seven-axis contact/non-contact measurement device with a fully integrated laser scanner. The
ScanArm is used for non-contact measurement applications, including inspection, cloud-to-CAD comparison, rapid prototyping, reverse engineering and 3-D modeling.
The FARO Gage.Sold as a combination of an articulated arm device with a computer and software, the FARO Gage is a smaller, higher-accuracy version of the FaroArm. The FARO Gage is also distinguished from the FaroArm by the special mounting features and software unique to the FARO Gage. The FARO Gage is targeted at machine tools and bench tops around machine tools, where basic measurements of smaller machined parts must be measured. As such, the CAM2 FARO Gage software developed for this device, described below, features basic 2-D and 3-D measurements common to these applications.
The FARO Laser Tracker Vantage.The FARO Laser Tracker Vantage combines a portable, large-volume laser measurement tool, a computer, and CAM2 software programs.
❑ Laser Tracker– The FARO Laser Tracker Vantage utilizes an ultra-precise laser beam to measure objects of up to 260 feet. It enables manufacturing, engineering, and quality control professionals to measure and inspect large parts, machine tools and other large objects on-site and in-process. With its greater angular resolution, repeatability, and accuracy, the FARO Laser Tracker Vantage advances already-proven tracker technology. Among its many enhanced features is TruADM™, which improves upon existing Absolute Distance Measurement
technology by providing the time-saving ability to reacquire the laser beam without the need to return to a known reference point or the need to hold the target stationary.
❑ Computer– The FARO Laser Tracker Vantage includes a notebook or desktop style computer, depending on the customer’s requirements, that includes the pre-installed CAM2 Software.
The FARO Focus3D.The FARO Focus3Dutilizes laser technology to measure and collect a cloud of data points, allowing for the detailed and precise three-dimensional rendering of an object or an area as large as a factory. This technology is currently used for factory planning, facility life-cycle management, quality control, forensic analysis and capturing large volumes of three-dimensional data. The FARO Focus3Dsimplifies modeling, reduces project time and maintains or increases the accuracy of the image. The resulting data is used with major CAD systems or FARO’s own proprietary CAM2 software.
The FARO 3D Imager AMP.The FARO 3D Imager AMP is a high-performance non-contact 3-D Imager, capable of collecting millions of points to generate infinitely-focused fringe patterns. The FARO 3D Imager AMP creates a highly-accurate point cloud of objects in the AMP’s field of view. This technology is used in quality control to improve product quality and reduce scrap, as well as for reverse engineering and rapid manufacturing.
FARO Software.The Company provides a family of proprietary CAD-based measurement and laser scanner software used with the Company’s measurement and scanning devices.
❑ CAM2 Measure 10allows customers to complete measurement jobs quickly and gives
customers the freedom to measure as required by the application. State-of-the-art functionalities improve every process where measuring is needed.
❑ FARO CAM2 Smartinspectis the Company’s CAM2 solution for measuring geometry and building dimensions. The software allows customers to quickly measure geometric features and report dimensions for control.
❑ FARO SCENEsoftware combines ease-of-use, networking, and an enhanced 3D experience to deliver a complete scan processing solution. With SCENE, customers can display, analyze, administer and edit 3D measurements in point clouds.
To support its product lines, the Company also offers extended warranties and comprehensive support, training and technology consulting services to its customers.
Customers
As of December 2013, the Company’s products have been purchased by approximately 15,000 customers worldwide, ranging from small machine shops to such large manufacturing and industrial companies as Audi, Bell Helicopter, Boeing, Bombadier, British Aerospace, Caterpillar, Daimler AG, Ford, General Electric, General Motors, Honda, Johnson Controls, Komatsu America International, Lockheed Martin, NASA, Nissan, Northrup Grumman, Siemens and Volkswagen, among many others, as well as universities and law enforcement agencies. The Company’s ten largest customers by revenue represented an aggregate of approximately 3.3% of the Company’s total revenues in 2013. No
customer represented more than 1.0% of the Company’s revenues in 2013. Sales and Marketing
The Company conducts its sales and marketing efforts on a decentralized basis in three main regions around the world: Americas, Europe/Africa and Asia/Pacific. The regional headquarters for the Americas is located in the Company’s headquarters in Lake Mary, Florida; the Europe/Africa regional
headquarters is located in Stuttgart, Germany; and the regional headquarters for the Asia/Pacific region is located in Singapore. At December 31, 2013, the Company employed 136, 141, and 156 sales and marketing specialists in the Americas, Europe/Africa, and Asia/Pacific regions, respectively. The Company sells most of its products through direct sales representation in the United States, Canada, Mexico, Brazil, Germany, the United Kingdom, France, Spain, Italy, Poland, Turkey, the Netherlands, India, China, Singapore, Malaysia, Vietnam, Thailand, and Japan. The Company also sells its products through distributors although this channel has historically represented a small percentage of total sales. Note 17 to the Company’s “Notes to Consolidated Financial Statements” included in Part II, Item 8 of this Annual Report on Form 10-K includes financial information about the Company’s foreign and domestic operations and export sales.
The Company’s sales and marketing efforts use a process of integrated lead qualification and sales demonstration. Once a customer opportunity is identified, the Company employs a team-based sales approach involving inside and outside sales personnel who are supported by application
engineers. Each team has the ability to sell multiple product lines. The Company employs a variety of marketing techniques to promote brand awareness and customer identification.
Research and Development
The Company believes that its future success depends, in part, on its ability to maintain technological leadership, which will require ongoing enhancements of its products and the
development of new applications and products that provide 3-D measurement solutions. The field of 3-D measurement continues to expand, and new technologies and applications will be essential to competing in this market. Accordingly, the Company intends to continue to make substantial
investments in the development of new technologies, the commercialization of new products that build on the Company’s existing technological base and the enhancement and development of additional applications for its products.
The Company’s research and development efforts are directed primarily at enhancing the
functional adaptability of its current products and developing new and innovative products that respond to specific requirements of the emerging market for 3-D measurement systems. The Company’s engineering development efforts will continue to focus on enhancing the mechanical hardware, electronics, and software in its existing products and developing new products for the CAM2 market. Research and development activities, especially with respect to new products and technologies, are subject to significant risks, and there can be no assurance that any of the Company’s research and development activities will be completed successfully or on schedule, or, if completed, will be commercially accepted.
At December 31, 2013, the Company employed 139 scientists and technicians in its research and development efforts. Research and development expenses were approximately $22.4 million in 2013, compared to $17.6 million in 2012 and $15.2 million in 2011.
Intellectual Property
The Company holds or has pending 312 patents in the United States and related patents worldwide, which generally expire on a rolling basis between 2014 and 2031. The Company also has 21 registered or pending trademarks in the United States and worldwide, which generally expire on a rolling basis between 2014 and 2032.
The Company’s success and its ability to maintain its competitive position depends, in large part, on its ability to protect its intellectual property. The Company relies on a combination of contractual provisions and trade secret laws to protect its proprietary information. However, there can be no assurance that the steps taken by the Company to protect its trade secrets and proprietary information will be sufficient to prevent misappropriation of its proprietary information or preclude third-party development of similar intellectual property.
Despite the Company’s efforts to protect its proprietary rights, unauthorized parties may attempt to copy aspects of the Company’s products or to obtain and use information that the Company regards as proprietary. The Company intends to vigorously defend its proprietary rights against infringement by third parties. However, policing unauthorized use of the Company’s products is difficult,
particularly in foreign countries, and the Company may be unable to determine the extent to which unauthorized use of its products exists. In addition, the laws of some foreign countries do not protect the Company’s proprietary rights to the same extent as the laws of the United States.
The Company does not believe that any of its products infringe on the proprietary rights of third parties. There can be no assurance, however, that third parties will not claim infringement by the Company with respect to current or future products. Any such claims, with or without merit, could be time consuming, result in costly litigation, cause product shipment delays or require the Company to enter into royalty or licensing agreements, which could have a material adverse effect upon the Company’s business, operating results and financial condition. In addition, such royalty or licensing agreements, if required, may not be available on terms acceptable to the Company, if at all.
Manufacturing and Assembly
The Company manufactures its FaroArm, FARO Gage, FARO 3D Imager AMP and FARO Laser Tracker Vantage products in the Company’s manufacturing facilities located in Florida and Pennsylvania for customer orders from the Americas, in its manufacturing facility located in Switzerland for customer orders from the Europe/Africa region, and in its manufacturing facility located in Singapore for customer orders from the Asia/Pacific region. The Company manufactures its FARO Focus3Dproduct in its facility located in Stuttgart, Germany. The Company is relocating its manufacturing facilities in Kennett Square, Pennsylvania to a larger facility in Exton, Pennsylvania. The Company expects all its existing plants to have the production capacity necessary to support its volume requirements through 2014.
Manufacturing consists primarily of assembling and integrating components and subassemblies purchased from suppliers into finished products. The primary components, which include machined parts and electronic circuit boards, are produced by subcontractors according to the Company’s specifications. All products are assembled, calibrated and tested for accuracy and functionality before shipment. The Company performs limited in-house circuit board assembly and component part machining. Typically, the Company enters into purchase commitments for manufacturing components to cover production requirements for 60 to 90 days.
The Company’s manufacturing, engineering, and design headquarters have been registered to the ISO-9001 standard since July 1998. Semi-annual surveillance audits have documented continuous improvement to this multinational standard. Currently, the Company’s manufacturing sites in Lake Mary, Florida; Kennett Square, Pennsylvania; Stuttgart, Germany; Schaffhausen, Switzerland; and Singapore are jointly registered to ISO-9001 and ISO-17025. In addition, the Company’s service sites in the United States, Germany, Switzerland, India, Japan, China, Singapore and Brazil have joint
certification and accreditation to ISO-17025. The Company continues to examine its scope of registration as its business evolves and has chosen English as the standard business language for its operations.
The Company’s efforts to register its manufacturing, engineering and design headquarters to the ISO-9001 standard in concert with the ISO9001:2008 Quality Management System Certification is expected to increase the quality of the Company’s processes, products and services worldwide.
Additionally, the Company takes a global approach to ISO17025:2005 regarding the recognition of the Competence of Calibration and Testing Laboratories, seeking to have all locations registered with similar scopes of accreditation and capabilities for the products generated and serviced.
Competition
The Company’s portable measurement systems compete in the broad and highly competitive market for measurement devices for manufacturing and industrial applications, which, in addition to portable articulated arms, laser tracker, 3-D imaging and laser scanner products, consist of fixed-base CMMs, templates and go/no-go gages, check fixtures, handheld measurement tools, and various categories of surveying equipment. In the FARO Gage product line, the Company competes with a number of manufacturers of handheld measurement tools and fixed-base CMMs, including some large, well-established companies. In the FaroArm, FARO Laser ScanArm, FARO Laser Tracker Vantage, FARO Focus3Dand FARO 3D Imager AMP product lines, the Company competes primarily with Hexagon Metrology, a division of Hexagon AB, and with Steinbichler Optotechink GmbH and GOM Gmbh in the 3D Imager product lines. The Company also competes in these product lines with a number of other smaller competitors. The Company competes on the basis of technical innovation, product performance, quality and price with respect to all of its products.
The Company will be required to make continued investments in technology and product development to maintain and extend the technological advantage that it believes it currently has over its competition. Some of the Company’s competitors, including some manufacturers of fixed-base CMMs and Hexagon, possess substantially greater financial, technical, and marketing resources than the Company possesses. Moreover, the Company cannot be certain that its technology or its product development efforts will allow the Company to successfully compete as the industry evolves. As the market for the Company’s portable measurement systems expands, additional competition may emerge and the Company’s existing and future competitors may commit more resources to the markets in which the Company participates.
Government Regulation
The Company’s operations are subject to numerous governmental laws and regulations, including those governing antitrust and competition, the environment, import and export of products, currency conversions and repatriation, taxation of foreign earnings and earnings of expatriate personnel and use of local employees and suppliers. The Company’s foreign operations are subject to the U.S. Foreign Corrupt Practices Act, or FCPA, and similar foreign anti-corruption laws, which makes illegal any payments to government officials or government employees that are intended to induce their influence to assist the Company or to gain any improper advantage for the Company. The Company operates in certain regions that are more prone to risk under these anti-corruption laws.
Manufacturers of electrical goods are subject to the European Union’s RoHS and WEEE directives, which took effect during 2006. RoHS prohibits the use of lead, mercury and certain other
specified substances in electronics products, and WEEE makes producers of electrical goods
financially responsible for specified collection, recycling, treatment, and disposal of covered electronic products and components. Parallel initiatives are being proposed in other jurisdictions, including several states in the United States and China.
The Company currently holds WEEE registration and is in compliance with the directives of the European Union. The Company’s products are currently exempt from the RoHS directive, although the Company expects to have all products in compliance in 2014. However, if the Company is unable to do so, and the RoHS exemption is removed, it would be unable to sell any of its affected products in European Union countries and China, as well as several possible states in the United States, which would have a material adverse effect on its sales and results of operations.
Backlog and Seasonality
At December 31, 2013, the Company had orders representing approximately $18.7 million in sales outstanding. The majority of these specific orders were shipped by February 19, 2014, and, as of February 19, 2014, the Company had orders representing approximately $18.1 million in sales
outstanding. The Company believes that substantially all of the outstanding sales orders as of February 19, 2014 will be shipped during 2014. At December 31, 2012 and 2011, the Company had orders representing approximately $18.0 million and $20.4 million in sales outstanding, respectively.
The Company typically experiences greater order volume during the fourth quarter as customers spend the remaining balances of their capital expenditures budgets.
Employees
At December 31, 2013, the Company had 1,078 full-time employees, consisting of 433 sales and marketing professionals, 166 production staff, 139 research and development staff, 123 administrative staff, and 217 customer service/application engineering specialists. The Company is not a party to any collective bargaining agreements and believes its employee relations are satisfactory. Management believes that its future growth and success will depend in part on its ability to retain and continue to attract highly skilled personnel. The Company anticipates that it will be able to obtain the additional personnel required to satisfy its staffing requirements over the foreseeable future.
Geographic Information
The Company has three reportable segments based upon geographic regions: Americas, Europe/ Africa and Asia/Pacific. The Company develops, manufactures, markets, supports and sells CAD- based quality assurance products integrated with CAD-based inspection and statistical process control software in each of these regions. These activities represent approximately 99% of consolidated sales. The Company evaluates performance and allocates resources based upon profitable growth and assets deployed. Information regarding the Company’s net sales, operating income, and long-lived assets by geographic region is set forth in Note 17 to the Consolidated Financial Statements under Part II, Item 8 to this Annual Report on Form 10-K.
Available Information
The Company makes available, free of charge on its Internet website at http://www.faro.com, its Annual Report on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, and any
amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Exchange Act as soon as reasonably practicable after they are electronically filed with, or furnished to, the Securities and Exchange Commission, or the SEC. You can find these reports on the Company’s website at www.faro.com by first clicking “Investor Relations” and then “SEC Filings”. The information on the Company’s website is not a part of this Annual Report on Form 10-K.
These reports may also be obtained at the SEC’s Public Reference Room at 100 F Street NE, Washington, DC 20549. Information on the operation of the Public Reference Room is available by calling the SEC at (800) SEC-0330. You may also access this information at the SEC’s website at http://www.sec.gov. This site contains reports, proxy and information statements and other information regarding issuers that file electronically with the SEC.
ITEM1A. RISKFACTORS.
The statements under this heading describe the most significant risks to the Company’s business identified by management and should be considered carefully in conjunction with the discussion under the heading “Management’s Discussion and Analysis of Financial Condition and Results of
Operations” and the Company’s “Notes to Consolidated Financial Statements” included in Part II, Item 8 of this Annual Report on Form 10-K.
Any of the following risks and uncertainties could materially and adversely affect our business, results of operations, liquidity, and financial condition. However, predicting or identifying all such risks and uncertainties is not possible. As a result, the following factors should not be considered to be a complete discussion of the Company’s risks and uncertainties.
Competitors may develop products that make the Company’s products obsolete or less competitive. The CAM2 market is characterized by rapid technological change. Competitors may develop new or improved products, processes or technologies that may make the Company’s products obsolete or less competitive.
As a result, the Company’s success depends, in part, on its ability to maintain its technological advantage by developing new products and applications and enhancing its existing products, which can be complex and time-consuming and require substantial investment by the Company. Significant delays in new product releases or difficulties in developing new products could adversely affect the Company’s business and results of operations. The Company can provide no assurance that it will be able to adapt to evolving markets and technologies or maintain its technological advantage.
The Company’s financial performance is dependent on the conditions of various industries, such as: automotive, aerospace, and heavy equipment industries, which have experienced from time to time, significant disruptions in the economic environment.
A significant portion of the Company’s sales are to manufacturers in the automotive, aerospace, and heavy equipment industries. The Company is dependent upon the continued viability and financial stability of its customers in these industries, which are highly cyclical and dependent upon the general health of the economy and consumer spending.
Reductions in defense spending could adversely affect the Company’s business.
Certain of the Company’s customers operate in the defense sector and depend significantly on U.S. government spending. In August 2011, Congress enacted the Budget Control Act of 2011 which
imposes spending caps and certain reductions in defense spending over the next ten years. Automatic spending reductions, referred to as sequestration, were implemented in March 2013. Ongoing
budgetary discussions in the federal government may result in other cuts to defense spending.
Reductions in defense spending that impact the aerospace and defense industries could have an adverse affect on the Company’s results of operations.
Customers’ buying process for the Company’s products is highly decentralized and typically
requires significant time and expense for the Company to further penetrate the potential market of a specific customer, which may delay its ability to generate additional revenue.
The Company’s success depends, in part, on its ability to further penetrate its customer base. During 2013, approximately 58% of the Company’s revenue was attributable to sales to its existing customers. If the Company is not able to continue to further penetrate its existing customer base, its sales growth may decline. However, most of the Company’s customers have a decentralized buying process for measurement devices, and the Company must spend significant time and resources to increase revenues from a specific customer. For example, the Company may provide products to only one of its customer’s manufacturing facilities or for a specific product line within a manufacturing facility. The Company cannot offer any assurance that it will be able to maintain or increase the amount of sales to its existing customers, which could adversely affect its financial results.
The Company’s ability to protect its patents and proprietary rights in the United States and foreign countries could adversely affect its revenues.
The Company’s success depends, in large part, on its ability to obtain and maintain patents and other proprietary right protection for its processes and products in the United States and other
countries. The Company also relies upon trade secrets, technical know-how and continuing inventions to maintain its competitive position. The Company seeks to protect its technology and trade secrets, in part, by confidentiality agreements with its employees and contractors. However, the Company’s employees may breach these agreements or the Company’s trade secrets may otherwise become known or be independently discovered by inventors. If the Company is unable to obtain or maintain protection of its patents, trade secrets and other proprietary rights, it may not be able to prevent third parties from using its proprietary rights, which could have a material adverse effect on the Company’s results of operations.
The Company’s patent protection involves complex legal and technical questions. Its patents may be challenged, narrowed, invalidated or circumvented. Further, the Company may be able to protect its proprietary rights from infringement by third parties only to the extent that its proprietary processes and products are covered by valid and enforceable patents or are effectively maintained as trade secrets. Furthermore, others may independently develop similar or alternative technologies or design around the Company’s patented technologies. Litigation or other proceedings to defend or enforce its intellectual property rights could require the Company to spend significant time and money, which could have an adverse impact on the Company’s financial condition.
Claims from others that the Company infringes their intellectual property rights may adversely affect its business and financial condition.
From time to time, the Company receives notices from others claiming it infringes their intellectual property rights. Resolving these claims may require the Company to enter into royalty or
licensing agreements on unfavorable terms, require it to stop selling or to redesign affected products, or require it to pay damages. In addition, from time to time, the Company is involved in intellectual property lawsuits. The Company could in the future incur judgments or enter into settlements of lawsuits and claims that could have a material adverse effect on the Company’s financial condition. Any litigation or interference proceedings, regardless of their outcome, may be costly and may require significant time and attention of the Company’s management and technical personnel.
Product failures or product availability and performance issues could result in increased warranty costs, delays in new product introductions and enhancements and adversely affect the Company’s business.
The Company regularly introduces new products and enhances existing products. Product failures in new or existing products of the Company could result in increased warranty costs, delays in new product introductions, and a loss of sales and customers and have an adverse effect on the
Company’s business and financial condition.
The Company may not be able to achieve financial results within its target goals, and its operating results may fluctuate due to a number of factors, many of which are beyond its control.
The Company’s ability to achieve financial results that are within its goals is subject to a number of factors beyond its control. Moreover, the Company’s annual and quarterly operating results have varied significantly in the past and likely will vary significantly in the future. Factors that cause the Company’s financial results to fluctuate include, but are not limited to, the following:
• adverse changes in the manufacturing industry and general economic conditions,
• the effectiveness of sales promotions;
• geographic expansion in the Asia/Pacific region and other regions;
• training and ramp-up time for new sales people;
• investments in potential acquisitions or strategic sales, product or other initiatives;
• investments in technologies and new products and product enhancements, including costs associated with new development and product introductions and the timing and market acceptance of new products and product enhancements;
• quality issues with the Company’s products;
• shrinkage or other inventory losses due to product obsolescence, scrap or material price changes;
• expansion of the Company’s manufacturing capability;
• the size and timing of customer orders, many of which are received towards the end of the quarter;
• the amount of time that it takes to fulfill orders and ship the Company’s products;
• the length of the Company’s sales cycle to new customers;
• customer order deferrals in anticipation of new products and product enhancements;
• start-up costs and ramp-up time associated with opening new sales offices outside of the United States;
• variations in the effective income tax rate and the difficulty in predicting the tax rate on a quarterly and annual basis; and
• litigation and regulatory action brought against the Company.
Any one or a combination of these factors could adversely affect the Company’s annual and quarterly operating results in the future and could cause it to fail to achieve its target financial results. The Company’s growth depends on the ability of the Company’s products to attain broad market acceptance.
The market for traditional fixed-base CMMs, check fixtures, handheld measurement tools, and surveying equipment is mature. Part of the Company’s strategy is to continue to displace these traditional measurement devices. Displacing traditional measurement devices and achieving broad market acceptance of the Company’s products requires significant effort to convince customers to reevaluate their historical measurement procedures and methodologies.
The potential size and growth rate of the CAM2 market is uncertain and difficult to quantify. If the CAM2 market does not continue to expand or does not expand as quickly as the Company anticipates, it may not be able to grow its sales, which may affect its financial results.
The Company markets six closely interdependent products (FaroArm, FARO Laser ScanArm, FARO Focus3D, FARO Laser Tracker Vantage, FARO Gage and FARO 3D Imager AMP) and related software for use in measurement, inspection, and high density surveying applications. Substantially all of the Company’s revenues are currently derived from sales of these products and software, and it plans to continue its business strategy of focusing on the portable, software-driven, 3-D measurement and inspection market. Consequently, the Company’s financial performance will depend in large part on portable, computer-based measurement, inspection, and high density surveying products achieving broad market acceptance. If its products cannot attain broad market acceptance, the Company will not grow as anticipated and may be required to make increased expenditures on research and development for new applications or new products.
The Company competes with manufacturers of portable measurement systems and traditional measurement devices, many of which have more resources than the Company and may develop new products and technologies.
The broad market for measurement devices is highly competitive. In the FARO Gage product line, the Company competes with manufacturers of handheld measurement tools and fixed-base CMMs, including some large, well-established companies. In the FaroArm, FARO Laser ScanArm, FARO Laser Tracker Vantage, FARO Focus3Dand FARO 3D Imager AMP product lines, the Company competes primarily with Hexagon Metrology, a division of Hexagon AB, and with Steinbichler Optotechink GmbH
and GOM mbH in the 3D Imager product lines. The Company also competes in these product lines with a number of other smaller competitors. The Company competes on the basis of technical innovation, product performance, quality, and price with respect to all of its products.
The Company will be required to make continued investments in technology and product development to maintain the technological advantage that it believes it currently has over its competition. Some of its competitors, including some manufacturers of fixed based CMMs and Hexagon, possess substantially greater financial, technical, and marketing resources than it possesses. Moreover, the Company cannot be certain that its technology or its product development efforts will allow it to successfully compete as the industry evolves. As the market for its portable measurement systems expands, additional competition may emerge and the Company’s existing and future competitors may commit more resources to the markets in which the Company participates. The Company’s results of operations could be adversely affected by pricing strategies pursued by competitors or technological or product developments by competitors.
The Company derives a substantial part of its revenues from its international operations, which are subject to greater volatility and often require more management time and expense to achieve profitability than its domestic operations.
The Company derives more than half of its revenues from international operations. The Company’s international operations are subject to various risks, including:
• difficulties in staffing and managing foreign operations;
• political and economic instability;
• unexpected changes in regulatory requirements and laws;
• longer customer payment cycles and difficulty collecting accounts receivable;
• compliance with export and import regulations and trade restrictions;
• governmental restrictions on the transfer of funds to the Company from its operations outside the United States; and
• burdens of complying with a wide variety of foreign laws and labor practices.
Several of the countries where the Company operates have emerging or developing economies, which may be subject to greater currency volatility, negative growth, high inflation, limited availability of foreign exchange and other risks. These factors may harm the Company’s results of operations and any measures that it may implement to reduce the effect of volatile currencies and other risks of its international operations may not be effective.
Because a significant portion of the Company’s revenues and expenses are denominated in foreign currencies, the Company faces significant exposure to foreign exchange rate risk.
The Company’s results of operations are affected by fluctuations in exchange rates which can cause significant fluctuations in the Company’s quarterly and annual results of operations. Fluctuations
